.

.

New
2 ערוץ מואנשים ממשק ממסר מודול עם חיווי על בקרה תעשייתית(12V)

2 ערוץ מואנשים ממשק ממסר מודול עם חיווי על בקרה תעשייתית(12V)

ILS 114.75

כמות
בטופס נגיש להזמנה

באמצעות תיקון optocoupler, בידוד חזק ביכולת הנהיגה, ביצועים יציבים; ההדק הנוכחי 5m A.באמצעות תיקון optocoupler, בידוד חזק ביכולת הנהיגה, ביצועים יציבים; ההדק הנוכחי 5m A.מודול יכול להיות מופעלות על-ידי מגשר כדי להגדיר רמה גבוהה או ברמה נמוכה.מודול מתח עבודה זמין ב-5 V, 9, 12 V, 24 V.Faulttolerant עיצוב, גם אם השליטה היא קו שבור, הממסר לא יזוז.המודול משתמש highquality ממסר, את עומס מרבי של כלל לפתוח את ממשק : 250 V AC/10 A, 30 V DC/10 A.המודול משתמש highquality ממסר, את עומס מרבי של כלל לפתוח את ממשק : 250 V AC/10 A, 30 V DC/10 A.באמצעות תיקון optocoupler, בידוד חזק ביכולת הנהיגה, ביצועים יציבים; ההדק הנוכחי 5m A.מודול מתח עבודה זמין ב-5 V, 9, 12 V, 24 V.מודול יכול להיות מופעלות על-ידי מגשר כדי להגדיר רמה גבוהה או ברמה נמוכה.Faulttolerant עיצוב, גם אם השליטה היא קו שבור, הממסר לא יזוז.חיווי (ירוק), ממסר מחוון מצב (אדום).ממשק עיצוב userfriendly, כל הממשקים יכול להיות מחובר ישירות דרך טרמינל בלוק, מאוד נוח.

מאפיינים

Module Size:
50 x 41 x 18.5mm / 1.97 x 1.61 x 0.73in
Hole Diameter:
3.1mm/0.12in
Hole Interval Distance:
44.5 x 35.5mm / 1.75 x 1.4in
Wiring Diagram:
DC+:
Connect the positive pole of the power supply (the voltage is required by the relay, there are 5V.9V.12V and 24V selection).
DC:
connected to the negative pole of the power supply.
IN1:
1 signal signal trigger terminal, you can set the high or low level control relay to pull in.
IN2:
2 channel signal trigger terminal, you can set the high or low level control relay to pull in.
Relay output:
NO1:
1 channel relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM1.
COM1:
1 channel relay common interface. 
NC1:
1 channel relay normally closed interface, short circuit connection with COM1 before the relay is closed, suspended after suction.
NO2:
2 channel relay normally open interface, the relay is suspended before the suction, after the suction and short circuit with COM2.
COM2:
2 channel relay common interface.
NC2:
2channel relay normally closed interface, shortcircuit with COM2 before the relay is closed, and float after the suction.
High and :
חדש

קונים גם בוחרים